Sawn timber

The Doussie coming from Central and West Africa, extracted into logs or dimensions with thickness 2.5 cm 5/100 8/100 etc. The toughness would be characterized moderate to high hardness. The color is red with some possible color changes due to pigments have. Used in windows, doors, furniture and parquet etc.

The niagon derived from West Africa (throughout the tropics), extracted into logs or sizes with thickness 2.5 cm 5/100 8/100 etc. Its color is red to brown depending on the exposure to the sun. The density is 62 g / m3 and the degree of hardness is moderate to high. Drying is characterized easy, its uses vary in epiplopoeia and construction of external frames. The maintenance is done with certain oils (teak oil) but also with colors and using mandatory and appropriate primers for the closure of its resources.

The Sipo comes mainly from Central Africa (Eastern and Western), extracted into logs or sizes with thickness 2.5 cm 5/100 8/100 etc. Its color is red in various shades (light and dark) and belongs to the maooeidon wood. Density is 0,58 g / m3 and the hardness degree is not considered very high. The uses are mainly in furniture and interior and exterior.

The Teak is coming from Africa, America and Asia often thrives throughout India. The typical dimensions in thicknesses of 2.5 cm 5 cm 8 cm, etc. The color is in various shades of brown and yellow, the density is around 0.66g / m3 and the hardness is too great. The maintenance is done only with special oil (teak oil) rather than colors because of oil and sand it contains. Used in outdoor floors, furniture, lumber and above ship deck. In our selection requires special attention to avoid the various imitations commercially available.

The Ash grows throughout Eastern USA. The hardness is quite high and ranges to 587 (N), and its color is white to light brown (yellow brown water). The resistance is excellent and used Furniture (kitchen doors) in frames in musical instruments sporting goods and various other internal structures.

The Oak comes mainly from Eastern USA , Romania, Central Europe and other countries. The density ranges approximately 675kg / m3 and the hardness is sufficiently high (6049N). The quality is separated into white and red oak with Fardyvena and Grain waters. Its color is white to yellow and pale to dark brown. The typical dimensions in thicknesses of 2.5 cm 5 cm 8 cm, etc. and metrisis unit is the inch. Many would consider the king of floor although its uses vary and furniture-and frames and interior decorations. The old years was the normal wood for the manufacture of wine barrels (cognac, whiskey, wine etc.)

The Iroko derived from Africa (Western and Eastern), extracted into logs and dimensioned to thicknesses of 2.5 cm 5 cm 8 cm, etc. The color is brown to yellow (gold-orange) in lighter and darker shades .Orismenoi will characterize substitute TEAK techniques and mechanical properties (very expensive). The density is 0,64r / m3 and changes color in accordance with the external conditions.

The cherry grows throughout Eastern USA The hardness is quite high and ranges in 4226 (N), and its color is red to brown. Wood is resistant to moisture and to the manufacture of furniture and musical instruments and loudspeakers as it gives the best audio. Many times we can meet and furniture and parquet flooring in interiors.

The Beech isw coming from West and Central Europe. The density is 0,67kg / m3 and of sufficiently high hardness. Its color is white to red which is affected by the drying (baking). The typical dimensions in thicknesses of 2.5 cm 5 cm 8 cm and uses the mainly Stijn furniture.

Oregon comes from the Eastern US and Canada. The density is 0.53 (530 kg / m3) and the hardness is good enough. Its color is yellow brown to light brown and red wood grain is Grain and Fardyvena. The use in Greece are small and intended mainly for specific internal structures for frames for shipbuilding (ship masts).

Pine thrives Sweden, Finland, Russia and Northern Europe. Its density is 0.48 kg / m3. Its color is light yellow-orange, and its quality is distinct from the density of the knot. Its use is in interior construction and building use.